Installation precautions for metal coil drapery:
1. make different connections according to the situation
If the wall is wooden, only the screws of the guide rail are directly installed in the fixed position of the wood. If the wall is made of cement, it is necessary to drill holes in a specific position with an electric drill, then tap into the special nylon expansion pipe, and then insert the screw into the special nylon expansion pipe to tighten it.
2. precautions for installing metal coil drapery hook
If metal coil drapery hook is used to fix metal coil drapery, it should be noted that the distance between metal coil drapery hooks should be calculated evenly first, rusty hooks should be replaced immediately. In actual use, the number of pins inserted into the slot can be adjusted, and the spacing between each hook can be adjusted to adjust the effective width of metal coil drapy.
3. the installation shall be firm
When installing metal coil drapery, it is necessary to ensure the installation firmness. Do not fall off automatically before using it for a while. This phenomenon is not good. Therefore, when installing metal coil drapery, please select the bracket matching the metal coil drapery and the pole. If the bracket is too small, it may easily damage the bracket. On the other hand, the support may be damaged, If the contact surface of the wall is small, the number of mounting nuts or the size of the nuts will be limited, which makes the metal coil drapery of installation unstable easily.